Flosserpik Pro Station – Gentle on the gums, strong against plaque. The powerful oral irrigator cleans thoroughly and gently with individually adjustable water pressure – ideal for braces, implants, bridges, periodontitis and halitosis (bad breath). Ten pressure levels, two cleaning modes and four special attachments ensure targeted, effective cleaning of the entire oral cavity. Can also be used with mouthwashes. The practical, easy-to-clean water tank increases comfort and hygiene. The Pro Station offers better plaque removal and gum care than conventional dental floss – easy to use, convincingly effective.

The Flosserpik Pro Station has four specialized attachments for targeted and thorough oral care. The four specialized essays at a glance:

• Jet attachment:
  Ideal for flossing, rinsing off food residue and cleaning around implants, braces and bridges thanks to its powerful water jet.
• Orthodontic attachment:
  Brush head with ultra-soft, tapered bristles. Ideal for cleaning orthodontic appliances such as braces or dentures.
• Subgingival attachment:
  Especially recommended for people with gum problems such as periodontitis for cleaning below the gum line and deep in the gum pockets, but only if the pressure is set to a low value. This attachment should only be used on the recommendation of a dentist.
• Tongue cleaner attachment:
  Flat, wide attachment for cleaning the tongue with water, which ensures more freshness and maintains the bacterial balance.

Technical specifications:

• Contains 1x jet attachment, 1x orthodontic attachment, 1x subgingival attachment and 1x tongue cleaner attachment
• Two cleaning modes: cleaning and massaging
• 600 ml maximum capacity
• Battery: DC 12V connection + adapter cable
• Water protection class IPX4 | Power unit IPX7
• Variable pressure control and pause button
• 100-240 V AC power | Power consumption max. 18 W
• 2-year manufacturer’s warranty
• 10-year guaranteed availability of replacement attachments

Do not switch on the appliance before you have put the nozzle in your mouth. Start with the lowest water pressure the first time you use it and slowly increase it until you have found the right pressure.

• Use level 1-2 for cleaning below the gums.
• Use levels 3-5 for cleaning around the gums.
• Use levels 6-8 for regular use.
• Use level 9-10 for special high-pressure cleaning.

How to use the flosserpik:

1. Hold the handle firmly and point the nozzle at the sink.
2. Press the main button to switch on the flosserpik.
3. Press the button again to select the desired mode. There are two modes: “Clean” mode and “Massage” mode. ‘Clean’ mode is selected by default.
   – Cleaning mode: The cleaning time is 30 seconds.
   – Massage mode: You can massage your gums in this mode.
   – The LED on the mode display shows which mode is being used.
4. Turn the knob on the side to change the water pressure. Once you have set the pressure, set the pause switch to the “Off” position to stop the water flow.
5. Align the nozzle to the desired position.
6. Lean over the sink, put the nozzle in your mouth and push the pause switch upwards to start the water flow. Keep your mouth slightly closed to avoid splashing.
7. Hold the water jet at a 90-degree angle to your teeth and gums.
8. Slowly move the water jet along your teeth. The appliance continues to run until the 2-minute cycle is complete or until you switch it off.

How to end:

• Automatic switch-off: The appliance switches itself off after the 2-minute cycle has elapsed.
• Switch it off by pressing the main button.
• Unplug the adapter directly from the socket in an emergency.